Posts tagged 'Print Finishing Equipment'

You take your car to the mechanic regularly in order for it to run smoothly. The same rule applies to your office equipment. It needs to be properly maintained to give you the highest quality and fastest output. A lot of times people only call on a service technician when something breaks down. However, you should get your machines serviced every 6-12 months (depending on usage). This will prolong their life and save you money in the long run. Here are some of the services that should be done to your machines at least every year:

In a nutshell, print finishing refers to anything done to printed material after it comes off the press or printer.

Some print finishing solutions actually happen at the end of the printing process, before the paper comes off the press. While these ‘inline’ finishing operations have increased in number due to digital printing, the majority of print finishing happens completely separately to the printing process and are called ‘offline’ finishing.

From mounting on boards to shrinkwrapping, finishing operations can be almost as varied as what’s on the paper. Here’s your guide to just about everything that can be considered print finishing: